Fryma Koruma MS-50 CoBall Mill

Stock# 84387
Fryma Koruma MS-50 CoBall Mill
- Throughput: 300-1750 liters/hr (300 to 2000 lbs/hr)
- 8 liter grinding chamber
- Netzsch progressive cavity pump
- Rotor, bowl and top of the bowl all jacketed
- 316 stainless steel product contact surfaces
- Unit is currently loaded with about 25% bead load
- VFD for main drive motor
- Siemens PLC with HMI interface
- Serial#103501 built 2019
- 3 phase, 60 cycle, 460 volts, 63 KW motor (about 85 HP)
- Was producing almond paste. Product entered mill 
  at 80-200um and exited at 2-30um paste.
- Machine was used in a Korsher certified parve (non-dairy) facility
- The CoBall mill is used for fine milling of suspensions and 
  high-viscosity products. 
  The milling action is created in the gap between the conical working
  vessel (stator) and a conical rotor. The gap is in the range of 6.5 
  to 17 mm depending on the model purchased.

Fryma MK-250 Corundum Stone 2000 lb/hr Nut Butter Mill

Stock# 84315
Fryma MK-250 Corundum Stone 2000 lb/hr Nut Butter Mill
- 50 liter hopper with screw feed with 1.5 HP motor with frequency inverter
- Corundum (ceramic) stone grinding discs
- Pre-cutter with integrated feed impeller
- Jacketed grinding head rated for 6 bar (87 psi)
- Particle size regulation by stepless, axial gap adjustment of 
  the stator (manual adjustment)
- Main motor 30 kw (40 HP),  3000 rpm, 3 phase, 60 cycle, 460 volts
- Stainless steel control panel
- Serial#103527 built 2019
- Used for less than 100 hours
- Customer processed almond butter at 2000 lbs/hr. Started with 
  whole and almond pieces. Reduced particle size to 80-100 um 
  (brochure spec is rated up to 2000 liters/hr)
- Can also be used to grind cocoa nibs into liquor